Sip 'n Scan with Dr. Armen Mirzayan: featuring Trios, by 3Shape
2023-06-15 18:00 - 20:00 (America/Los_Angeles) | CAD-Ray Las Vegas Campus, 8400 W Sunset Rd, Suite 300, Las Vegas, NV, 89113
Have you been eager to jump into scanning, but don’t know where to start with the questions? Say no more. CAD-Ray has put together a brief, exploratory evening of conversation and cocktails; and good news-there are NO silly questions! Whatever your knowledge base on the subject, this is a perfect opportunity to ask the questions you’ve been thinking about but have been too embarrassed to let fly.
Dr. Mirzayan will cover the basics-the most obvious advantages, the next steps from there, and so on. You’ll leave with all the information you haven’t gotten around to Googling, only with expert advice instead of countless, unqualified responses to your questions. Please come join us and get acclimated to the scanning movement with the best team in digital dentistry-only at CAD-Ray!
When: Thursday, June 15, 2023​-6:00pm-8:00pm​
Where: CAD-Ray Showroom (8400 W. Sunset Rd. #300, Las Vegas, NV 89113)​
Cost: Free! (wine, beer, and light appetizers will be served*)​
Instructor: Dr. Armen Mirzayan​
CE Units: 2 units​
About Dr. Armen Mirzayan
Armen Mirzayan graduated from Northwestern Dental School in 1998 and completed his General Practice residency at the Queen’s Medical Center in Honolulu, Hawaii. He met his wife, Dr. Jean Lee-Mirzayan in dental school and they started a practice together in downtown Los Angeles.
Early in his career, Dr. Mirzayan believed that there was little chance that he (and the industry as a whole) would continue to practice analog dentistry for too long, and he eventually purchased a CEREC system in January of 2001. Since then, he has used every version of the CEREC, and has milled on more than a dozen different chairside milling machines. He is also well versed in CBCT technologies and has had a unit in his own practice since 2009. Since then, he has trained well over 10,000 dentists in the use of CAD/CAM, CBCT and guided implant technologies.
In addition to private practice, he co-founded www.cerecdoctors.com; the original site that fostered a training/social network for the community of digital dentists, and essentially set the tone for the growth that the industry enjoys today. In 2013, Dr. Mirzayan founded CAD-Ray to serve as a center for teaching dentists guided surgery techniques and how to fabricate surgical guides. Since its inception, CAD-Ray has manufactured over 35,000 surgical guides and counting. It wasn’t until 2018 that the distribution arm of CAD-Ray was formed, which focuses on the distribution of reliable, efficient digital dentistry options as well as focused training and support for those technologies.
These days, Dr. Mirzayan spends most of his professional time in three ways. First, he travels the country teaching intraoral scanning, digital dentistry shortcuts and advanced dental techniques in his role as the clinical education director for CAD-Ray. Second, he rigorously tests new digital (dental) equipment; evaluating each product for reliability and durability to see if they are worthy of joining the CAD-Ray portfolio of supported products. Third, he still practices dentistry; both as a way of staying fresh, and also to test out new techniques and product innovations. His favorite part of the business is knowing that the strong majority of practicing CAD-Ray customers use their equipment on a daily basis.
Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

Trios Training - Las Vegas - June 16-17 2023
2023-06-16 09:00 - 2023-06-17 14:30 (America/Los_Angeles) | CAD-Ray Las Vegas Campus, 8400 W Sunset Rd, Suite 300, Las Vegas, NV, 89113
Title-Trios by 3Shape Advanced Training and Intro to Full Digital Workflow
Objectives:

To understand the additional functionality of the digital scanner beyond simple scanning and provide insight into the procedures that can be incorporated into a practice by diving into the expanded functionality.
To understand the basics of moving to an expanded or full digital workflow with the incorporation of in-house design and/or 3D Printing or milling.

Teaching Methods:
Lecture instruction, guided self-scanning and design applications, and guided computer instruction to send models to printer
Materials and Speakers are Subject to Change DAY 1 Morning Session:

Fundamentals of Digital Impressions
Understand how to quickly capture and accurately render full arch cases
How and what to delegate to team members
Mastery of single unit impressions, complex cases, and learn how to stage of full arch cases
Managing errors introduced in imaging
Learn all of the advantages of digital impressions over analog and how you can function independent of time and sequence and how you can take advantage of the editable and additive features of intra-oral scans

Sample Video of Content at Course

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

02:04

01:05

Afternoon Session:

1 PM – 3:15 PM Kaila Larsen Basic Training for doctors and team members

Navigating the software interface, features, and reviewing software tools start to finish
Basic Case Setup- Crown/Bridge/Implant
Scanning workflows/techniques
Adding/Sending to labs via communicate portal

3:30 PM – 5 PM Andrew Sedler – Implant Restorations

Implant Studio
Digital implant restorations
Design single units, copy cases, and custom abutments from scan bodies
Digital Dentures

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.
Sample Course Material

Day 2 Morning Session: Dr. Armen Mirzayan

Merging intra-oral scans with CT scans
Guided Surgery

Afternoon Session : Ms. Mary Holliday

3Shape Apps
Implant Studio- Implant Planning

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

CE Credits: 14
Presenter-Dr. Armen Mirzayan
Armen Mirzayan graduated from Northwestern Dental School in 1998 and completed his General Practice residency at the Queen’s Medical Center in Honolulu, Hawaii. He met his wife, Dr. Jean Lee-Mirzayan in dental school and they started a practice together in downtown Los Angeles.
Early in his career, Dr. Mirzayan believed that there was little chance that he (and the industry as a whole) would continue to practice analog dentistry for too long, and he eventually purchased a CEREC system in January of 2001. Since then, he has used every version of the CEREC, and has milled on more than a dozen different chairside milling machines. He is also well versed in CBCT technologies and has had a unit in his own practice since 2009. Since then, he has trained well over 10,000 dentists in the use of CAD/CAM, CBCT and guided implant technologies.
In addition to private practice, he co-founded www.cerecdoctors.com; the original site that fostered a training/social network for the community of digital dentists, and essentially set the tone for the growth that the industry enjoys today. In 2013, Dr. Mirzayan founded CAD-Ray to serve as a center for teaching dentists guided surgery techniques and how to fabricate surgical guides. Since its inception, CAD-Ray has manufactured over 35,000 surgical guides and counting. It wasn’t until 2018 that the distribution arm of CAD-Ray was formed, which focuses on the distribution of reliable, efficient digital dentistry options as well as focused training and support for those technologies.
These days, Dr. Mirzayan spends most of his professional time in three ways. First, he travels the country teaching intraoral scanning, digital dentistry shortcuts and advanced dental techniques in his role as the clinical education director for CAD-Ray. Second, he rigorously tests new digital (dental) equipment; evaluating each product for reliability and durability to see if they are worthy of joining the CAD-Ray portfolio of supported products. Third, he still practices dentistry; both as a way of staying fresh, and also to test out new techniques and product innovations. His favorite part of the business is knowing that the strong majority of practicing CAD-Ray customers use their equipment on a daily basis.
Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

Level 2 - Las Vegas - June 23-24 2023
2023-06-23 09:00 - 2023-06-24 14:30 (America/Los_Angeles) | CAD-Ray Las Vegas Campus, 8400 W Sunset Rd, Suite 300, Las Vegas, NV, 89113
Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

One Day Update on Digital Dentistry-Presentation with Dr. Armen Mirzayan
2023-07-07 09:00 - 17:00 (America/Los_Angeles) | Hilton Hawaiian Village
April Pricing: $50
May Pricing: $100
June Pricing: $200
July Pricing: $400
** Price doubles on the first of every month and attendance is limited so register early**

It doesn’t matter what intra-oral scanner you are currently using-our courses cover non-denominational topics and details common to all of them. Join us to expand your knowledge of each scanner’s functionality beyond simple scanning, and gain insight into all of the next-level procedures it’s capable of to maximize your investment.
Course topics/objectives are as follows:

Discovering ways we can introduce errors while scanning, and how we can eliminate them
Finding out how to print and mill any restoration or prosthesis from your IOS
Discover how you can train your team to do most of the clinical work for you.
Learn how easy it can be to do a full mouth reconstruction using your intra-oral scanner
Design, print, and deliver a nightguard for yourself so you can understand how the full digital workflow process works

Watch this introductory video on the overview of digital dentistry

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.
understanding digital dentistry

Here is a sample video of the material Dr. Mirzayan will be presenting at this event:

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.
Scan Path

About the speaker

Armen Mirzayan graduated from Northwestern Dental School in 1998 and completed his General Practice residency at the Queen’s Medical Center in Honolulu, Hawaii. He met his wife, Dr. Jean Lee-Mirzayan in dental school and they started a practice together in downtown Los Angeles.
Early in his career, Dr. Mirzayan believed that there was little chance that he (and the industry as a whole) would continue to practice analog dentistry for too long, and he eventually purchased a CEREC system in January of 2001. Since then, he has used every version of the CEREC, and has milled on more than a dozen different chairside milling machines. He is also well versed in CBCT technologies and has had a unit in his own practice since 2009. Since then, he has trained well over 10,000 dentists in the use of CAD/CAM, CBCT and guided implant technologies.
In addition to private practice, he co-founded www.cerecdoctors.com; the original site that fostered a training/social network for the community of digital dentists, and essentially set the tone for the growth that the industry enjoys today. In 2013, Dr. Mirzayan founded CAD-Ray to serve as a center for teaching dentists guided surgery techniques and how to fabricate surgical guides. Since its inception, CAD-Ray has manufactured over 35,000 surgical guides and counting. It wasn’t until 2018 that the distribution arm of CAD-Ray was formed, which focuses on the distribution of reliable, efficient digital dentistry options as well as focused training and support for those technologies.
These days, Dr. Mirzayan spends most of his professional time in three ways. First, he travels the country teaching intraoral scanning, digital dentistry shortcuts and advanced dental techniques in his role as the clinical education director for CAD-Ray. Second, he rigorously tests new digital (dental) equipment; evaluating each product for reliability and durability to see if they are worthy of joining the CAD-Ray portfolio of supported products. Third, he still practices dentistry; both as a way of staying fresh, and also to test out new techniques and product innovations. His favorite part of the business is knowing that the strong majority of practicing CAD-Ray customers use their equipment on a daily basis.

***GOOD NEWS!*** This course includes access to the 3D Discovery event with Dr. Vu Le, details below:

Dr. Vu Le

Course Objectives
The Complete Nightguard Workflow: Almost all dental patients have signs of bruxism and providing nightguards are a necessary part of their treatment plan. Dr. Vu Le has mastered the effortless nightguard workflow. See the signs of bruxism that you and your team should look out for. Learn the fundamentals of scanning with a novel stepped bite stick which captures the patient in centric relation. Dr. Le will demonstrate how to upload the scans into several different online design services and design a splint utilizing AI in just minutes! Vu Le, DDS is a general dentist in Foothill Ranch, CA. He is a pioneer in dental 3d printing and holds two US parents for his breakthrough photography system, the VPR. This course is sponsored by Sprintray and CAD-Ray. Dr. Le designs, manufactures and sells the VPR using 3d printing.
About the Instructor
Vu Le, DDS is a graduate of Loma Linda University School of Dentistry. He hold two patents for the VPR, a groundbreaking lighting system for smartphone cameras. The VPR is designed and manufactured over thousands of hours of 3d printing. He is a longtime member of the Sprintray printing community, and inventor of the VuBase printing raft and several other calibration design tools. Most importantly, he is a husband, dad, and small town dentist just like anyone else.
Disclosures
This course is made possible by an honorarium from CAD-RAY and Sprintray. The instructor has previously received honorariums, sponsorships, and printing supplies from Sprintray, Inc. He has no ownership interest in CAD-RAY or Sprintray, Inc.
Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

Two Day CAD-Ray Level 2 Medit Training- Honolulu - July 7 - 8 2023 - For Owners
2023-07-07 09:00 - 2023-07-08 14:00 (America/Los_Angeles) | Hilton Hawaiian Village
DAY 1 Morning Session:

Fundamentals of Digital Impressions
Learn all of the advantages of digital impressions over analog and how you can function independent of time and sequence and how you can take advantage of the editable and additive features of intra-oral scans

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

Master Intra-Oral Scanning Under Our Supervision

Scan Yourself in No Time

Tips and Tricks to Make your Life Much Easier Back at the Office

Mastery of single unit impressions, complex cases, and learn how to stage of full arch cases
Managing errors introduced in imaging
Understand how to quickly capture and accurately render full arch cases
How and what to delegate to team members
This is a sample video of a full mouth rehabilitation you will learn how to manage by late morning of Day 1

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.
learn how to manage full arch cases in simple segments

Full arch scans for aligners and other appliance can be tricky with a lot of intra-oral scanners. With some sound principles and easy tutorials you can image a full arch in very little time. The reliability map, unique to the Medit i500 helps you stay on track and avoid model distortion and inaccuracies

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

Afternoon Session:

Digital implant restorations
Mastery the artificial intelligent implant suprastructure identification system to manage direct abutments and scanbodies
Design single units, copy cases, and custom abutments from scan bodies

The following videos demonstrate how the Medit i500 has artificial intelligence that can readily identify a dental implant scanbody, a direct abutment, or even an impression abutment. What is even more impressive is that you can import your own library of implant components or design and create your own scanbody. This automatic identification of implant suprasctructures saves dozen of steps whether you wish to fabricate restorations in the office or send it to the lab.

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

Medit's i500 Artifical Intelligence Identifies Implant Fixture

ALL of the Pertinent Information is Imported into exocad as One Complex

Medit i500’s artificial intelligence implant identification system spots a titanium scanbody on a freshly uncovered biomax implant. It didn’t matter how bloody the field was- it readily identified the suprastructure which is then transferred to the cad software where the implant location and timing is correctly displayed and the design of the custom abutment begins, saving many steps and reducing potential errors. The cool part is the software can recognize impression abutment, tibases, and lots of other supra structures.

You can see this case in more detail here

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

medit i500 artifical intelligence scanbody identification

impression abutment and tibase scan

DAY 2 Morning Session: Digital Implantology

Introduction and mastery of Integration of Cone Beam data and STL data
Understanding the limitation of Cone Beam and STL integration
Integration and limitation of multiple Cone Beam data sets
Proper digitization of denture duplicates for stent fabrication
Multiple ways to design a surgical stent and how to choose appropriate design type
Proper case presentation techniques for patients
Single implant placement designs
Understand how to use Cone Beam scans and surgical stent
Treatment planning large cases
Appropriate case set ups and their ramifications during surgery
The multiple uses for chairside denture duplication
Chairside denture duplication and scan appliance fabrication
Impression techniques for multiple fixtures
Impression techniques for multi-abutments
Restorative designs of abutments on CAD software

﻿

Afternoon Session: Edentulous and Full Mouth Cases

Immediate extractions and how to keep track of the vertical dimension
The multiple restorative options available to you
Accurate transfers of fixtures to models
Digital impressions for edentulous cases
Edentulous case design in with digital dentures
photogrammetry and intra-oral scans of full arch cases
Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

Two Day 3Shape Advanced Training - Honolulu Hawaii - July 7-8 2023 - For Owners
2023-07-07 09:00 - 2023-07-08 14:00 (America/Los_Angeles) | Hilton Hawaiian Village
Materials and Speakers are Subject to Change DAY 1 Morning Session:

Fundamentals of Digital Impressions
Understand how to quickly capture and accurately render full arch cases
How and what to delegate to team members
Mastery of single unit impressions, complex cases, and learn how to stage of full arch cases
Managing errors introduced in imaging
Learn all of the advantages of digital impressions over analog and how you can function independent of time and sequence and how you can take advantage of the editable and additive features of intra-oral scans

Sample Video of Content at Course

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

02:04

01:05

Afternoon Session:

1 PM – 3:15 PM Kaila Larsen Basic Training for doctors and team members

Navigating the software interface, features, and reviewing software tools start to finish
Basic Case Setup- Crown/Bridge/Implant
Scanning workflows/techniques
Adding/Sending to labs via communicate portal

3:30 PM – 5 PM Andrew Sedler – Implant Restorations

Implant Studio
Digital implant restorations
Design single units, copy cases, and custom abutments from scan bodies
Digital Dentures

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.
Sample Course Material

Day 2 Morning Session: Dr. Armen Mirzayan

Merging intra-oral scans with CT scans
Guided Surgery

Afternoon Session : Ms. Mary Holliday

3Shape Apps
Implant Studio- Implant Planning

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

SprintRay Users and Discovery Event - July 7-8 - Honolulu Hawaii
2023-07-07 09:00 - 2023-07-08 15:30 (America/Los_Angeles) | Hilton Hawaiian Village
Topics and Speakers are Subject to Change
Dr Usa Bunnag – Daily Applications for Sprintray Printing: Friday July 7 from 9 AM to 12 PM
Dr Vu Le – Fundamentals of Printing with Sprintray: Friday July 7 from 1 PM to 5 PM
Dr Andrew Ip- Clinux CAD Software and Printing: Saturday 9AM to 12 PM Lecture and 1 PM to 3 PM Hands-On Demonstrations

Dr. Usa Bunnag Course Objectives:
Learn how Dr. Usa Bunnag incorporates SprintRay 3D printing into her two fee-for-service dental practices, finds a new passion in her dental journey, and expands her ability to serve her patients. You will also learn how 3D printing can increase revenue and reduce operating costs while allowing more time to provide direct patient care and delegate the workflow to the team. Some of the uses are:

Clear aligner therapy
Surgical guides
Nightguards
Veneers, crowns,
Trial Smiles and waxed-up models
Temporary bridges
Partial dentures
Study models
Perio Splinting
Lingual retainers
Maryland bridges

3D printing can even be used for outside-the-box treatments to help patients when there are no other options. Anything is possible with 3D printing.
Ready to be part of the revolution to discover a new passion in your dental journey, increase revenue, and save time?

About Dr. Usa Bunnag
Usa Bunnag, DDS, graduated from Howard University School of Dentistry in 1994. Before becoming a dentist, she was a Certified Dental Assistant and Expanded Function Dental Assistant. Her career spans over 42 years in dentistry. Dr. Bunnag owns two fee-for-service dental practices emphasizing comprehensive dentistry using digital and laser technology. She has been 3D printing with SprintRay technology for over five years. Dr. Bunnag is a mom of two young men and a caretaker for her disabled husband. She is also the President and Founder of Smiles on Wings, a charity providing humanitarian help in Thailand. Her work as a humanitarian earned her recognition from the ADA as the 2017 Humanitarian of the Year and from the ICD, USA section, the Distinguished Humanitarian in 2019, and countless accolades. Her passion for dentistry reflects her passion for life and humanity.

Dr. Vu Le

Course Objectives
The Complete Nightguard Workflow Almost all dental patients have signs of bruxism and providing nightguards are a necessary part of their treatment plan. Dr. Vu Le has mastered the effortless nightguard workflow. See the signs of bruxism that you and your team should look out for. Learn the fundamentals of scanning with a novel stepped bite stick which captures the patient in centric relation. Dr. Le will demonstrate how to upload the scans into several different online design services and design a splint utilizing AI in just minutes! Vu Le, DDS is a general dentist in Foothill Ranch, CA. He is a pioneer in dental 3d printing and holds two US parents for his breakthrough photography system, the VPR. This course is sponsored by Sprintray and CAD-Ray. Dr. Le designs, manufactures and sells the VPR using 3d printing.
About the Instructor
Vu Le, DDS is a graduate of Loma Linda University School of Dentistry. He hold two patents for the VPR, a groundbreaking lighting system for smartphone cameras. The VPR is designed and manufactured over thousands of hours of 3d printing. He is a longtime member of the Sprintray printing community, and inventor of the VuBase printing raft and several other calibration design tools. Most importantly, he is a husband, dad, and small town dentist just like anyone else.
Disclosures
This course is made possible by an honorarium from CAD-RAY and Sprintray. The instructor has previously received honorariums, sponsorships, and printing supplies from Sprintray, Inc. He has no ownership interest in CAD-RAY or Sprintray, Inc.

Dr. Andrew Ip: Chairside dental digital design and 3D printing
Are you sick of waiting for a week or two to get your jobs back from your local lab and then finding out they have lousy margins and/or a poor fit? There has got to be a better (and more efficient) way of doing things!
Well now there is – discover how simple-to-use software can change your entire workflow – no licence fees, no lock-in contracts, no worries. Clinux – a completely open cloud-based platform that caters for chairside use – for the digital dentist, the trained dental auxiliary, and any dental team member.

Course objectives
Not convinced? This is what we’ll go through during the day:

The advantages and disadvantages of outsourcing dental design
The advantages and disadvantages of keeping dental design in-house
Popular dental design software options and advantages and disadvantages of each
Clinux – an overview of the software
Single and multi-unit crown overview – from intraoral scan, design
Occlusal splint/nightguard design – from intraoral scan, design
Printing crowns – considerations for printing, post-print finishing (polishing vs staining)
Printing splints – considerations for printing, post-print finishing (polishing vs glazing)

About the speaker
Nerd, dweeb, freak – Dr Andrew Ip has been called it all.
Except now geek is chic.
What was once a simple hobby now takes up a significant portion of his daily work.
Handy Andy is a Sydney-based private general dentist who presents regularly on dental 3D printing. He achieved Membership in General Dental Practice with the Royal Australasian College of Dental Surgeons in 2017 and obtained a Graduate Diploma of Orthodontics at James Cook University in 2019 and a Masters of Science in Implantology and Dental Surgery in 2022. He has recently obtained a Postgraduate Diploma in Digital Dentistry with the International Digital Dentistry Academy.
Dr Ip has been teaching dentists and technicians how to integrate additive technologies to their workplaces for several years and is a Key Opinion Leader for several digital dentistry-related companies. When he’s not designing a surgical guide, printing a splint or polishing a printed crown, you can find him glued to a screen designing printable table organisers or nesting a helmet for his cats in a slicer.
Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

HAWAII Symposium July 7-8
2023-07-07 09:00 - 2023-07-08 17:00 (America/Los_Angeles) | Hilton Hawaiian Village
Schedule and Speakers
Friday, July 7
Digital Dentistry and Intraoral Scanning

9a – 12p: Crash Course on Digital Dentistry: Basic to Advanced with Dr. Armen Mirzayan
1 – 4p: Medit Basics with Laura Geney
1 – 4p: Trios Basics with Dr. Armen Mirzayan

Sign up Here
3D Printing

9a – 12p: SprintRay Daily Applications for Printing with Dr. Usa Bunnag
1 – 5p: Fundamentals of Printing with Dr. Vu Le

Sign up Here
Surgical Guides and Full Arch Cases

9a – 12p: Surgical Guide Design in BlueSkyBio & Surgical Guidance for Full Arch with Dr. Danny Domingue and Dr. Cory Glenn

Sign up Here
Milling and Processing

9a – 12p: Designing and Creating Anterior Teeth Using New High Strength Glass Cermics to Form, Contour, Finish and Polish with Dr. Ed McClaren
1 – 4p: One-hour Single Visit Restoration with Lithium Disilicate: Just Mill, Polish, and Place with Yao-Lin Tang

Sign up Here
Saturday, July 8
Digital Dentistry and Intraoral Scanning

9a – 12p Dr. Armen Mirzyan on Advanced Applications within Digital Dentistry
9a – 12p Trios Apps with Justin Lee

Sign up Here
3D Printing

9a – 12p: Clinux CAD software and Printing Nightguards and Crowns with Andrew Ip
1 – 3p: Hands on Demos with Dr. Andrew Ip

Sign up Here
Surgical Guides and Full Arch Cases

9a – 12p: Surgical Guide Design in BlueSkyBio & Surgical Guidance for Full Arch with Dr. Danny Domingue and Dr. Cory Glenn

Sign up Here
Milling and Processing

9a – 1p: How to Create the Ideal Surface – Hands-on Workshop with Dr. Ed McClaren

Sign up Here

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.
Former CAD-Ray Symposiums

01:48

Incredible Sunrises and Sunsets00:10

Sail Boat Rides01:33

Canoe Surfing01:11

Macfarlane Canoe Regatta00:07

Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

International Symposium on Dental Ceramics
2023-07-07 09:00 - 2023-07-08 17:00 (America/Los_Angeles) | NV

Exocad 101 Deep dive into Exocad!
2023-08-03 08:30 - 2023-08-05 15:30 (America/Los_Angeles) | NV

CAD-Ray Digital Dentistry Study Club
2023-08-03 18:00 - 20:00 (America/Los_Angeles) | CAD-Ray Las Vegas Campus, 8400 W Sunset Rd, Suite 300, Las Vegas, NV, 89113
Digital Orthodontics and Clear Aligner Manufacturing

Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

ProSleep Prosomnus Event August 10-12
2023-08-10 09:30 - 2023-08-12 17:00 (America/Los_Angeles) | NV
Hear from, and collaborate with, world class sleep medicine clinicians and experts on the latest research and clinical data supporting precision Oral Appliance Therapy as an alternative and front-line treatment for OSA. Over a dozen lecturers, select panels, 12 CE hours, supportive sponsors wrapped in the ProSomnus family comradery during a beautiful summer weekend in San Francisco offering the best view by the bay!
Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

Australian Event
2023-08-29 09:00 - 17:00 (America/Los_Angeles) | CAD-Ray Las Vegas Campus, 8400 W Sunset Rd, Suite 300, Las Vegas, NV, 89113

LV Perio Study Club
2023-09-06 18:00 - 20:00, 2023-09-13 18:00 - 20:00 (America/Los_Angeles) | NV

CDA Presents in San Jose September 7-9, 2023
2023-09-07 08:00 - 2023-09-09 17:00 (America/Los_Angeles) | NV
CDA Presents in San Jose
September 7-9, 2023
McEnery Convention Center
San Joes, CA
https://www.cda.org/Home/News-and-Events/CDA-Presents
Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

CAD-Ray Digital Dentistry Study Club
2023-09-12 18:00 - 20:00 (America/Los_Angeles) | CAD-Ray Las Vegas Campus, 8400 W Sunset Rd, Suite 300, Las Vegas, NV, 89113
Sept 12 Study Club Flyer_Corrected

Digital implant restorations
Mastery the artificial intelligent implant suprastructure identification system to manage direct abutments and scanbodies
Design single units, copy cases, and custom abutments from scan bodies

The following videos demonstrate how the Medit i500 has artificial intelligence that can readily identify a dental implant scanbody, a direct abutment, or even an impression abutment. What is even more impressive is that you can import your own library of implant components or design and create your own scanbody. This automatic identification of implant suprasctructures saves dozen of steps whether you wish to fabricate restorations in the office or send it to the lab.

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

Medit's i500 Artifical Intelligence Identifies Implant Fixture

ALL of the Pertinent Information is Imported into exocad as One Complex

Medit i500’s artificial intelligence implant identification system spots a titanium scanbody on a freshly uncovered biomax implant. It didn’t matter how bloody the field was- it readily identified the suprastructure which is then transferred to the cad software where the implant location and timing is correctly displayed and the design of the custom abutment begins, saving many steps and reducing potential errors. The cool part is the software can recognize impression abutment, tibases, and lots of other supra structures.

You can see this case in more detail here

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

medit i500 artifical intelligence scanbody identification

impression abutment and tibase scan

Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

LA Dental Meeting
2023-09-15 08:00 - 2023-09-16 17:00 (America/Los_Angeles) | NV

CAD-Ray National Sales Event
2023-09-20 09:00 - 2023-09-23 20:00 (America/Los_Angeles) | CAD-Ray Las Vegas Campus, 8400 W Sunset Rd, Suite 300, Las Vegas, NV, 89113

LV3-Intro to Milling, Las Vegas, NV
2023-09-22 09:00 - 2023-09-23 17:00 (America/Los_Angeles) | CAD-Ray Las Vegas Campus, 8400 W Sunset Rd, Suite 300, Las Vegas, NV, 89113
Gain a simple understanding of milling basics, with hands-on training in single and multiple-unit crown cases.
Class objectives: at the end of this course, attendees should be able to grasp the following concepts

Proper prep design
Retraction techniques for successful scanning
How to design simple posterior restoration
How to move a designed stl file through CAM software and mill
How to process zirconia with hands-on training
Processing of green state zirconia and finishing skills after sintering
Chairside workflows for efficiency

Course schedule:
Day 1
– Introduction to manufacturing – Lecture, 8:30 – 10:00 – Frank
– Design Single unit posterior zirconia restoration, 10:15 – 11:00 – Frank and Armen
o Get in Dof mill for afternoon
– Prep Design and materials selection 11 – 12 – Amen and vendor partner(Vita, Hass, etc.)
– Lunch 12 – 12:30
– Design multiple posterior restorations (2 premolars) 12:45 to 1:45
– Design inlay/onlay and anterior unit 2:00 – 3:00
– Zirconia pre-polishing 3:00 – 4:30 and lecture – Units from AM session
– Closing Statements
– 5:30 – Freshen up
– Dinner 6:00 – 8:00
Day 2
– Design your own case from home – 8:30 – 10:00 – Design to be milled
– Lecture 10:00 – 12:00 – intro to Exo and Abutments
– Lunch 12 – 1:00
– Stain/glaze fire 1:00 – 2:30
– Closing 2:30 – 3:30
– 3:00 – 4:00 Q&A/get restos

Speaker profile: Frank DeLuca
Frank DeLuca started his career in dental sales in 2008, and quickly gravitated toward technology and equipment. Holding clients hands through the integration of technology has always been the highlight of his time, and keeps the work fulfilling. Whether an intraoral scanner, 3D printer, mill or CBCT, Frank has always wanted to know as much as possible to help in any situation. “I believe it is imperative to work with someone like me who truly enjoys technology; it is really not work when you enjoy it. Getting to see the “ah-haa” moments in a client’s eyes is why I do what I do.”
Sample Restorative Cases:
*DOWNLOAD Case 1: Crown
*DOWNLOAD Case 2: Onlay
*DOWNLOAD Case 3: Korolation
*DOWNLOAD Case 4: Custom Abutment
*DOWNLOAD Case 5: Replication of Central Incisor on Tibase
Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

Level 2 Medit Scanning-Las Vegas
2023-09-29 09:00 - 2023-09-30 15:00 (America/Los_Angeles) | CAD-Ray Las Vegas Campus, 8400 W Sunset Rd, Suite 300, Las Vegas, NV, 89113
DAY 1 Morning Session:

Fundamentals of Digital Impressions
Learn all of the advantages of digital impressions over analog and how you can function independent of time and sequence and how you can take advantage of the editable and additive features of intra-oral scans

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

Master Intra-Oral Scanning Under Our Supervision

Scan Yourself in No Time

Tips and Tricks to Make your Life Much Easier Back at the Office

Master of single unit impressions, complex cases, and learn how to stage of full arch cases
Managing errors introduced in imaging
Understand how to quickly capture and accurately render full arch cases
How and what to delegate to team members
This is a sample video of a full mouth rehabilitation you will learn how to manage by late morning of Day 1

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.
learn how to manage full arch cases in simple segments

Full arch scans for aligners and other appliance can be tricky with a lot of intra-oral scanners. With some sound principles and easy tutorials you can image a full arch in very little time. The reliability map, unique to the Medit i500, i600, and i700 help you stay on track and avoid model distortion and inaccuracies

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

Afternoon Session:

Digital implant restorations
Mastery the artificial intelligent implant suprastructure identification system to manage direct abutments and scanbodies
Design single units, copy cases, and custom abutments from scan bodies

The following videos demonstrate how the Medit i500 has artificial intelligence that can readily identify a dental implant scanbody, a direct abutment, or even an impression abutment. What is even more impressive is that you can import your own library of implant components or design and create your own scanbody. This automatic identification of implant suprasctructures saves dozen of steps whether you wish to fabricate restorations in the office or send it to the lab.

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

Medit's i500 Artifical Intelligence Identifies Implant Fixture

ALL of the Pertinent Information is Imported into exocad as One Complex

Medit i500’s artificial intelligence implant identification system spots a titanium scanbody on a freshly uncovered biomax implant. It didn’t matter how bloody the field was- it readily identified the suprastructure which is then transferred to the cad software where the implant location and timing is correctly displayed and the design of the custom abutment begins, saving many steps and reducing potential errors. The cool part is the software can recognize impression abutment, tibases, and lots of other supra structures.

You can see this case in more detail here

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

medit i500 artifical intelligence scanbody identification

impression abutment and tibase scan

DAY 2 Morning Session: Digital Implantology

Introduction and mastery of Integration of Cone Beam data and STL data
Understanding the limitation of Cone Beam and STL integration
Integration and limitation of multiple Cone Beam data sets
Proper digitization of denture duplicates for stent fabrication
Multiple ways to design a surgical stent and how to choose appropriate design type
Proper case presentation techniques for patients
Single implant placement designs
Understand how to use Cone Beam scans and surgical stent
Treatment planning large cases
Appropriate case set ups and their ramifications during surgery
The multiple uses for chairside denture duplication
Chairside denture duplication and scan appliance fabrication
Impression techniques for multiple fixtures
Impression techniques for multi-abutments
Restorative designs of abutments on CAD software

Afternoon Session: Edentulous and Full Mouth Cases

Immediate extractions and how to keep track of the vertical dimension
The multiple restorative options available to you
Accurate transfers of fixtures to models
Digital impressions for edentulous cases
Edentulous case design in with digital dentures
photogrammetry and intra-oral scans of full arch cases

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

CAD-Ray Digital Dentistry Study Club
2023-10-03 18:00 - 20:00 (America/Los_Angeles) | CAD-Ray Las Vegas Campus, 8400 W Sunset Rd, Suite 300, Las Vegas, NV, 89113
Oct 3 Study Club Flyer
Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

ADA Smilecon
2023-10-05 09:00 - 2023-10-07 17:00 (America/Los_Angeles) | NV
link to show floor

Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

CoOperate Event
2023-10-12 17:30 - 20:00, 2023-10-16 (America/Los_Angeles) | NV

LV2 Medit Scanning-Newark, NJ
2023-10-13 09:00 - 2023-10-14 14:00 (America/New_York) | Courtyard by Marriott Newark Downtown-Passaic Room, 858 Broad St, Newark, NJ, 07102, United States

LV2 Medit Scanning-Chicago, IL (Oak Brook)
2023-10-20 09:00 - 2023-10-21 15:00 (America/Chicago) | Lizzadro Museum of Lapidary Art, 1220 Kensington Rd, Oak Brook, IL, 60523, United States
DAY 1 Morning Session:

Fundamentals of Digital Impressions
Learn all of the advantages of digital impressions over analog and how you can function independent of time and sequence and how you can take advantage of the editable and additive features of intra-oral scans

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

Master Intra-Oral Scanning Under Our Supervision

Scan Yourself in No Time

Tips and Tricks to Make your Life Much Easier Back at the Office

Master of single unit impressions, complex cases, and learn how to stage of full arch cases
Managing errors introduced in imaging
Understand how to quickly capture and accurately render full arch cases
How and what to delegate to team members
This is a sample video of a full mouth rehabilitation you will learn how to manage by late morning of Day 1

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.
learn how to manage full arch cases in simple segments

Full arch scans for aligners and other appliance can be tricky with a lot of intra-oral scanners. With some sound principles and easy tutorials you can image a full arch in very little time. The reliability map, unique to the Medit i500 helps you stay on track and avoid model distortion and inaccuracies

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

Afternoon Session:

Digital implant restorations
Mastery the artificial intelligent implant suprastructure identification system to manage direct abutments and scanbodies
Design single units, copy cases, and custom abutments from scan bodies

The following videos demonstrate how the Medit i500 has artificial intelligence that can readily identify a dental implant scanbody, a direct abutment, or even an impression abutment. What is even more impressive is that you can import your own library of implant components or design and create your own scanbody. This automatic identification of implant suprasctructures saves dozen of steps whether you wish to fabricate restorations in the office or send it to the lab.

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

Medit's i500 Artifical Intelligence Identifies Implant Fixture

ALL of the Pertinent Information is Imported into exocad as One Complex

Medit i500’s artificial intelligence implant identification system spots a titanium scanbody on a freshly uncovered biomax implant. It didn’t matter how bloody the field was- it readily identified the suprastructure which is then transferred to the cad software where the implant location and timing is correctly displayed and the design of the custom abutment begins, saving many steps and reducing potential errors. The cool part is the software can recognize impression abutment, tibases, and lots of other supra structures.

You can see this case in more detail here

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

medit i500 artifical intelligence scanbody identification

impression abutment and tibase scan

DAY 2 Morning Session: Digital Implantology

Introduction and mastery of Integration of Cone Beam data and STL data
Understanding the limitation of Cone Beam and STL integration
Integration and limitation of multiple Cone Beam data sets
Proper digitization of denture duplicates for stent fabrication
Multiple ways to design a surgical stent and how to choose appropriate design type
Proper case presentation techniques for patients
Single implant placement designs
Understand how to use Cone Beam scans and surgical stent
Treatment planning large cases
Appropriate case set ups and their ramifications during surgery
The multiple uses for chairside denture duplication
Chairside denture duplication and scan appliance fabrication
Impression techniques for multiple fixtures
Impression techniques for multi-abutments
Restorative designs of abutments on CAD software

Afternoon Session: Edentulous and Full Mouth Cases

Immediate extractions and how to keep track of the vertical dimension
The multiple restorative options available to you
Accurate transfers of fixtures to models
Digital impressions for edentulous cases
Edentulous case design in with digital dentures
photogrammetry and intra-oral scans of full arch cases

Please enable JavaScriptplay-rounded-fill

LinkEmbedCopy and paste this HTML code into your webpage to embed.

Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

Dentistry in General and RIPE event in Chicago
2023-10-21 | NV

Introduction to 3D Printing: Simplifying Steps for Success
2023-10-25 19:00 - 20:00 (America/New_York)
Discover the Future of Dentistry: FREE Introductory 3D Printing Course!
Are you a curious dentist looking to stay ahead of the curve in the rapidly evolving world of dentistry? Unlock the doors to innovation with this FREE introductory 3D printing course, created by Dr. Usa Bunnag exclusively for dental professionals like you.

What to Expect:
In this immersive course, we’ll take you on a journey into the basics of 3D printing for dentistry. You’ll gain a fundamental understanding of what 3D printing can bring to your dental practice, opening up a world of possibilities and enhanced patient care.
Course Highlights:

Explore the Foundations: Delve into the fundamental principles of 3D printing, demystifying the technology and its applications in the dental field.
Discover the Potential: Learn how 3D printing can revolutionize your workflow, from digital scanning to crafting precision dental models and prosthetics.
Interactive Q&A: Engage with industry experts and fellow dental professionals in our interactive Q&A sessions. Get answers to your burning questions and gain insights into real-world applications.

Why Attend:
By the end of this course, you’ll have a solid foundation in 3D printing for dentistry. You’ll be well-equipped to evaluate the potential of 3D printing technology for your practice, enhance patient outcomes, and stay at the forefront of dental innovation.
Course Details:

Date: Wednesday, October 27th
Time: 7-8pm Eastern
Duration: 60 minutes
Location: Online

Secure Your Spot: Register at the link below!
Don’t miss this exclusive opportunity to explore the future of dentistry through 3D printing. Reserve your FREE spot in our introductory course now!
Ready to embark on a journey of dental innovation? Register today and take the first step toward transforming your practice with 3D printing.
Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...

American Academy of Implant Dentistry Annual Conference
2023-11-02 09:00 - 2023-11-03 17:00 (America/Los_Angeles) | Ceasars, 3570 S Las Vegas Blvd, Las Vegas, NV, 89109, United States
Booth 705

Please Share this:TweetWhatsAppRedditTelegramEmailPrintLike this:Like Loading...
